Solid-colored decorative laminates coated with an anti-fingerprint finish. With a very soft touch, they offer non-stick properties. They are easy to clean and reduce the use of cleaning agents. The surfaces remain always impeccable, even when subjected to intensive use. Their ultra-matte finishes also guarantee a low degree of gloss. This new collection is available in the 25 iconic Pure Paper Color references, one of the widest color range on the market.

High pressure laminate (HPL) with anti-fingerprint Oberflex finish. Matte color. Extra smooth surface. Very soft touch, the product offers non-stick properties for an easy maintenance.

Technical product thanks to its very high resistance (complying with the requirements of the EN 438 standard)

Standard dimension : 3050 x 1270 mm

Other dimensions on demand :

• 2150 x 950 mm
• 2520 x 950 mm
• 2520 x 1270 mm
• 2150 x 1270 mm
• 3050 x 950 mm

Matched edge bandings : PVC 1 mm edge bandings x 25 colours of the collection

Obersound acoustic panels compatibility : yes

Fire ratings : M1, Bs2d0 or IMO on demand

Datasheet color Anti-fingerprint 

Collections

Oberflex

New usage for Oberflex wood panels : write with pen or chalk and put up or fix accessories using magnets
http://www.oberflex.com/416–smart-surface.html

Pure Paper

New usage for Pure Paper laminates : write with chalk and put up or fix accessories using magnets

Colors

The unanimously acknowledged aesthetic qualities of Oberflex products are the result of rigorous selection of the finest types of wood from the world’s top suppliers.

PEFC certification guarantees that all our wood comes from sustainably managed forests.

Optimisation

Each batch of veneer sheets comes from a single log in order to ensure maximum homogeneity in terms of colour and structure. Thanks to the precise slicing involved, a single log may provide several thousand square meters of veneer: 1m3 of wood gives an average of 1500m2 of veneer.

Verification

Upon receipt, each package of veneer sheets is opened by hand and checked by the naked eye in order to remove any non-standard sheets or batches and prevent any aesthetic fault.

Assembly

The sheets display different structures depending on whereabouts in the slicing process they come from: the “slabwood” or the “squared” part. They are then sorted by colour and joined in a number of ways: regular if we are looking for a “cabinetwork” effect (a symmetrical or repeated motif) or irregular if a “massive” effect is sought. The sheets of wood are prepared in this way before receiving the special treatment that will turn them into an Oberflex product.

Finish

At this stage, the veneer may benefit from a surface treatment that will make the product extremely hard-wearing.

A number of finishes are available: matt or satin, silk, sanded or relief.

So many effects, all intended to meet the expectations of our clients and enhance our range of panels, to which we may add aesthetic and acoustic perforations, standard or customised.

Valorisation

A final manual check on the finished product allows us to discard any product displaying a fault in its appearance or technical quality. Since Oberflex doesn’t supply seconds, the waste material is valorised in our biomass boiler, which supplies our workshops with their basic energy.